Extra Strong Fast Glue with brush 10 ml

Surface preparation:

Ensure that the surfaces to be bonded are clean, dry and free from dust, oil or any other contaminants.

If necessary, lightly sand surfaces to improve adhesion.

Application of the glue:

Unscrew the cap and use the integrated brush to apply a thin layer of glue to one of the surfaces to be bonded.

Apply the glue evenly and avoid excess to prevent overflow.

Assembly :

Align the surfaces to be bonded and press them firmly together.

Hold the pressure for a few seconds to allow the glue to set.

Drying and hardening:

Allow the glue to dry completely. Initial drying time is usually quick (a few seconds), but full cure may take several hours.

Avoid handling glued items until the glue is completely cured.

Personal safety:

Use glue in a well-ventilated area to avoid inhalation of potentially harmful fumes.

Wear gloves to avoid skin contact. If contact occurs, rinse immediately with warm water and soap.

Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with clean water and seek medical advice immediately.

Correct use:

Use glue only according to the instructions provided. Do not use on surfaces that may come into contact with food or drink.

Apply the glue carefully to avoid overflows and drips.

Hygiene :

Clean the brush and cap after each use to prevent glue from drying and clogging the opening.

Close the bottle tightly after use to keep the glue in good condition.

Storage :

Store the glue in a cool, dry place, away from direct sunlight and heat sources.

Keep the bottle tightly closed when not in use to prevent the glue from drying out or deteriorating.

Children :

Keep glue out of reach of children to avoid any risk of ingestion or accident.

Allergies:

If you have known allergies to adhesives or chemicals, perform a tolerance test by applying a small amount of glue to a less sensitive area of ​​skin and wait 24 hours.

If an allergic reaction occurs, discontinue use immediately and consult a doctor.